|
Wardrobe Internal Kit -Straight line Package (Standard)
Compete Wardrobe Internal Kit –Colour: Std Laminate White (Texture Finish). Typical Builders range.
The Width of this Wardrobe Internal Kit can be over-ridden to suit the wall space that you have. The max width of this kit is 3600mm and the min width is 3301mm -If your measurements are out-side these dimensions then you will need to select another kit or make up your own custom kit using the 'Cabinets -Individual / Wardrobe Cabinetry / Wardrobe Internals' tab on the Home Page on the website.
The over-all width of the complete unit and the width adjustment (if less than the default 3600mm) is made in the Hanging Rail section of this Wardrobe Insert.
These kits are fixed in there design layout however is you required a different layout configuration then you can simply create your own custom design by going to the 'Cabinets -Individual / Wardrobe Cabinetry / Wardrobe Internals' tab on the Home Page of the website.
Specifications:
- Width Over-all: 3600mm (default) however this can be changed to suit your wall space available.
- Height Over-all: 1800mm (default) however this can be changed to suit your personal needs.
-
Depth Over-all: 445mm (default) however this can be changed to suit your space available.
Included in this Package:
- 2 x 800mm wide Shelf Internals with 2x adjustable & 1x fixed shelves (at 300mm off the ground) as default in each section. The number of shelves can be changed.
- 2 x (up to) 1000mm wide Full Hang Internals with 1x Metal Oval Hanging Rail in each section. Each section has a variable width (depending upon the over-all width than you enter).
- 1 x Top Fixing Rail per Internal Section -To fix the rear of the Internals to the wall
- Top Shelf (1800mm high as default however this can be changed)
- Internals are manufactured from 16mm standard White laminate HMR (High Moisture Resistant) Particle board –Australia manufactured board.
- Edge tape: 1mm thick White ABS edging for durability and longevity
- All screws, hanging rails and hardware to assemble internals are included.
- Australian Made.
Not Included in this package:
- Assembly of internals
- Installation or any other service trade (i.e.: electrician, etc)
- Fixing hardware to wall -I.e.: The screws, nails or anchors to fix the Internals to wall itself as this depends upon the wall type, i.e.: timber/metal frame, brick, concrete, etc.
- A back panel: These Wardrobe Internals do not require a back and as such none is included.
- A base & kick board: These Wardrobe Internals do not require a base or kick board and as such none is included. They sit directly on the floor.
- Doors: As these are just the Wardrobe Internals.
Model Number: WI-36SHHS
We hope that this information has been helpful for you.
If you need further help or more information on this topic please:
|